……………………….



Furore Formula One



 



 



Price List



 



The price list is for guidance only, prices may fluctuate due to changes from suppliers etc., however I will always do my utmost to maintain fair pricing of all items on the car. All parts are purchased on the understanding that the purchaser is competent to fit them & it is the responsibility of the purchaser to ensure that all parts are fitted correctly & suitable for the usage they are to be put to. Furore Cars/ Mr RJ Bost will not be held responsible for the outcome of parts being fitted incorrectly, or used for unsuitable applications – the car is designed for use on the Public road & no warranties for it’s use for trackdays, racing, rallying or any form of motorsport are given or implied.



 



Chassis, powder coated, upper & lower front wishbones, upper & lower rear wishbones, front suspension rocker arms & pushrods, front hub adapters, rear upright adapters (all the above apart from chassis in bare unpainted finish) & all bolts & bushes to assemble the above other than those coming from the donor. £2395



 



Fuel Tank 6 gall  (Approx)               £175



 



Fuel Tank 8 1/2 gall  (alternative)   £250



 



Pedal Box                                        £180



 



Seats (pair)                                      £300



 



Shocks & Springs (set of 4)             £395



 



Radiator                                          £80



 



 4 x Flexy Brake Hoses – Braided  £90



 



Extra Wide Cycle Wings (4 0ff)        £120



 



The full chassis pack (all of the above except the cycle wings & assuming the 6 gall tank), totals £3615 however bought as a package we make a reduction of £165 meaning you get the whole chassis pack for just £3450.



 



In addition to the above you will require a Toyota MR2 Mk1 as a donor, a Fiat Cinquecento/Seicento steering rack & lower steering column & some alloy sheet to skin the floor & inner cockpit. With the parts listed above this will get you to a rolling chassis stage. If you want to fit a bike engine, we have currently jigged an engine cradle (available at additional cost) for the Kawasaki ZX10/ZZR1100 & a conversion (also additional cost),  for the Toyota diff which comes “free” with your donor vehicle, to chain drive, this includes an electric reverse assembly if required using the Toyota starter motor. The chassis will, I believe, accommodate most bike engines, just contact me to discuss your requirements.



 



Bodywork – Available in white gelcoat as standard, for an extra £120 can be produced in any “straight”, i.e. non-metallic RAL colour code. All body panels are now available. The complete bodywork less airbox which will be an optional extra (not required if you’re going to use it as a 2 seater all the time) will be priced at £2450, plus front & rear wings (aerofoils) &  plus cycle wings. The gel coat will require primer & paint to give a perfect finish, though if you are intending to use decals or to paint areas to produce a particular colour scheme you may well find the gelcoat finish perfectly adequate.



 



 

I can now accept all major Credit/Debit cards on telephone orders for parts. For any major purchase such as a chassis/body kit I would have to pass on the charges for Credit cards of 3%, Debit cards at no extra charge



 


 These are the smallest traditional style "E" marked headlights available (to the best of my knowledge) The headlamp pattern is described as flat & I was told by my SVA tester on 22/12/08 that a flat beam is completely legal in the UK, apparently it is the British/American beam pattern, however, most Mot (& SVA) testers expect to see a “kickup” to the left. If you look at the beam closely, it is in fact a shallow angle “V” which if you rotate the lamp by 15 degrees gives the required “kickup” for the standard UK beam pattern. Hence, remove the lens & file a new slot about 12-13mm to the right (when viewed from the front) to locate the lens. This is exactly how my Furore was presented for SVA test on 22/12/08 & the lights passed without any query whatsoever. The lenses are just over 90mm & they measure approx 105mm across the diameter of the casing. They have mounts on each side so can be mounted within a "U" or "C" bracket or on the end of a post. I have suitable mounting brackets in stock see below for prices. Not only do they keep wind resistance down due to their small size, they are also very lightweight too. The units come complete with dip/main halogen bulbs & built in sidelight. Available in satin black or chrome.

PRICE JUST £46.95 + £5.95 P & P per pair, Stainless Steel mounting brackets (ready for polishing) £18.95, Mild Steel mounting brackets £14.95 P & P £2.95 in both cases (P & P FREE if ordered with lights). To order just call Russ on 07905 879407


 Stainless Steel mounting brackets (ready for polishing) £16.95pr, Mild Steel mounting brackets £12.95pr P & P £2.95 in both cases. To order just call Russ on 07905 879407


This is a stainless bracket pictured, the mild steel ones are identical, except, strangely, they're in mild steel!


 These carbon effect mirrors with LED side repeaters built in are very cool, I would suggest using them in addition to any existing side repeaters, but anything which helps people to see where you're going can be no bad thing. They are very light & have a sturdy mounting stem with the wiring carried inside, an excellent addition to any kitcar. Bright amber LED's, just connect up to your existing indicator wiring. I also have these in both chrome & black.

PRICE JUST £15.95 per pair + £3.95 P & P, to order just call Russ on 07905 879407


 These "F1 Style" carbon effect mirrors are superb. Lightweight & low drag, ideal for a Furore & many other vehicles too. Stem length 120mm from the adjuster, they mount on a 30mm long M6 thread.The mirror glass measures 110mm x 50mm.

PRICE JUST £19.95 + £3.95 P & P per pair, to order just call Russ on 07905 879407


 I carry a full range of Acewell digital speedos/dashes, I use these on the Furore & have found both the quality & ease of fitting/calibrating the units to be excellent.
I stock all the current units from the new bargain basement 258 @ £85 & the new 2859W thro' the 1100, 1500, 1600 & the various 3XXX units with or without warning light surrounds. I also carry spares & can usually order in anything not in stock within a few days.

Call me if there is anything you need to know about the Acewell units - I buy direct from the importer & will not be beaten on price, but also offer full spares, technical & backup service.


 



 


 


 We offer a brake pipe manufacturing service. These are stainless steel braided flexy hoses, pvc coated, with stainless steel swaged ends, ABSOLUTELY TOP QUALITY perfect for IVA.

Banjo ends are available in 6 colours black, purple, blue, green, gold & red + obviously plain stainless steel, the colours are electrophoretically applied hence are not easily scratched & will not fade in sunlight, the coloured banjos can only be supplied straight as bending can damage the coating.

All other ends/fittings are in plain stainless. The hoses are available in 19 colours, plain, green, silver, blue, carbonfibre look, dark purple, black, orange, yellow, neon blue, light purple, red, white, pink, translucent red, green & yellow.

Most hose colours are available from stock, all commonly found end fittings are available from stock, most coloured banjos are from stock, some to special order. Most hoses can be supplied for around £14.95 - £17.90 + P & P of £3.95, the coloured banjos add £2.50 per hose.

Colour code your hoses to your vehicle for no more than the cost of a standard hose, & these are absolutely top quality, unlike some available with aluminium or mild steel end fittings which will either create an electrolytic reaction or will corrode. Call for more details & to order 07905 879407.


 


 


 


 


 Brackets & bushes. I have all sorts of laser cut bracketry available from stock & can also offer a cutting service for short runs from your own drawings in Stainless Steel, Mild Steel & Aluminium.

Bush kits comprising 16 top hat bushes, 8 crush tubes, & 8 outer tubes suitable for suspension pivot bushes for 10mm bolt mounting £38 plus P & P

Brackets for the above bushes £2.25ea in 3mm mild steel, these have 3mm each side of the bush to allow for caster adjustment & holes in the base of the bracket to allow for bolted fitment if required.






Find all of the latest offers and bargains in one place. Includes hard to find web exclusive offers and discount promotion codes for all of the top stores, Argos, PC World Dixons etc.
Web2go Web Design